Neighborville repairs gas and electric ovens, stoves and ranges across Chicago and the suburbs, usually the same day. In this heavily gas-heated city, the call we get most is a gas oven that won’t heat while the stovetop burners still light — a worn oven igniter. We also fix bake and broil elements, uneven baking, faulty burners and control boards. The $99 diagnostic is waived when you approve the repair. Call (773) 389-2643 for fast, safe oven and range service.

What Breaks Chicago Ovens & Stoves

Chicago is a gas town. With Peoples Gas serving the city, gas ranges and ovens are the norm across its bungalows, two-flats, greystones and walk-ups — and that shapes the repairs we do. The single most common call is a gas oven that won’t heat: the stovetop burners light fine, but the oven stays cold because its igniter has weakened with age and can no longer open the gas safety valve. It’s a defined part and a routine fix, but it’s the bread-and-butter oven failure in this market in a way it never is in all-electric regions.

Electric and dual-fuel ranges add their own patterns. A bake element that shorts at the end of its life can send a voltage spike into the control board — and in older Chicago homes still running 60-amp service and aging branch wiring, that spike lands harder than it would on modern suburban wiring. That’s why we always check the board for collateral damage before ordering parts. For the national troubleshooting picture, see our guide on why an oven won’t heat to the set temperature.

Common Oven & Stove Failures We Fix in Chicago

Gas oven won’t heat — igniter

The top Chicago oven repair. The igniter glows but no longer gets hot enough to open the safety valve, so the oven won’t light or reach temperature while the stovetop still works.

Electric oven no heat — bake/broil element

A visibly blistered or broken element, or one that no longer glows. Often paired with a board check if it shorted on the way out.

Uneven baking / won’t hold temp

Usually a failing temperature sensor or calibration drift — the oven runs hot or cold, or cooks unevenly front to back.

Surface burner problems

A gas burner that clicks but won’t light (igniter or clogged port), or an electric coil/element that won’t heat (burner, switch or receptacle).

Control board & display

Blank display, unresponsive touchpad, or error codes — the higher-cost repair, common after a surge on older wiring.

Oven & Stove Repair Costs in Chicago

Typical Chicago-area ranges including parts and labor. Gas parts run slightly higher than electric. You always get a written estimate first, and the $99 diagnostic is waived when you approve the work.

Oven & Stove Repair Across Chicago & the Suburbs

Neighborville covers oven, stove and range repair across the whole city and the collar suburbs. On the North Side — Lincoln Park, Lakeview, Logan Square, Andersonville, Rogers Park; on the Northwest and West — Wicker Park, Bucktown, Pilsen; and across the South Side — Bridgeport, Bronzeville, Hyde Park, Beverly, Back of the Yards (60609) and Englewood (60621). The gas-range and older-wiring patterns above are typical of the area’s housing stock.

In the suburbs we cover Cook County (Evanston, Oak Park, Skokie, Cicero, Berwyn, Des Plaines, Oak Lawn, Orland Park, Arlington Heights), DuPage County (Elmhurst, Wheaton, Naperville) and out toward Kane and Lake counties (Aurora and north). From a standard gas range in a Cicero kitchen to a pro-style Wolf in a Naperville build, we carry parts for the common platforms — the same brands Abt Electronics in Glenview sells — and diagnose before we quote.

Oven & Range Brands We Repair in Chicago

Oven & Stove Repair FAQ — Chicago

Other Repair Services in Chicago

Last updated: July 2026 · Neighborville Appliance Repair · Call (773) 389-2643 · Chicago, IL